What are the low-temperature welding methods for stamping elbows?

Stamping elbows have certain characteristics and performance advantages in use, and can play an important role and feature in the industry. So, do you know what are the low-temperature welding methods for stamping elbows?

The low-temperature welding method for stamping elbows is as follows

1. Low temperature WE88C welding wire is used in conjunction with WE88C-F flux for welding. At this point, the appropriate welding tool should be selected based on the structure and welding requirements of the base material to be welded. For example, if there are no special requirements, just stick it on and use a soldering iron to weld. Therefore, it doesn't matter if it is slightly larger. This has been done before using WE88C welding wire with WE88C-F solder, and there is a video of using this soldering iron to weld stainless steel.

2. Use WE46 special brazing material stamping elbow welding, which can replace high silver welding wire welding.

3. High silver VOD203 welding wire can be used for welding, which has good fluidity. The only drawback is the high average cost, and this type is also the most commonly used. When welding stainless steel, auxiliary VOD201-F solder paste is required for welding.