The polishing method for stainless steel elbows is as follows:
1. Before polishing the elbow, it is necessary to choose an 80 mesh louver grinding wheel and place it flat. When polishing, one should not be in a hurry, and the strength and speed should be controlled well.
2. After grinding with an 80 mesh louver grinding wheel, use a 320 mesh louver grinding wheel to re polish. In order to avoid leaving traces left by the 80 mesh louver grinding wheel, it is necessary to polish very carefully.
3. After polishing, you can wax the stainless steel elbow.
4. After waxing, continue to use the jute wheel for polishing, and the harder the polishing, the better the effect.
5. Remember to wipe the wax clean when finishing, as some dust may make it easier to clean.
The above is the method for polishing stainless steel elbows, hoping to be helpful to everyone.
CHINESE
